Long-term effects of chronic exposure to electronic cigarette aerosol on the cardiovascular and pulmonary system in mice: A comparative study to cigarette smoke.

Electronic cigarettes (e-cigarettes) have rapidly gained popularity as alternatives to traditional combustible cigarettes. However, their long-term health impact remains uncertain. This study aimed to investigate the effects of chronic exposure to e-cigarette aerosol (ECA) in mice compared to conventional cigarette smoke (CS) exposure. The mice were exposed to air (control), low, medium, or high doses of ECA, or a reference CS dose orally and nasally for eight months. Various cardiovascular and pulmonary assessments have been conducted to determine the biological and prosthetic effects. Histopathological analysis was used to determine structural changes in the heart and lungs. Biological markers associated with fibrosis, inflammation, and oxidative stress were investigated. Cardiac proteomic analysis was applied to reveal the shared and unique protein expression changes in ECA and CS groups, which related to processes such as immune activation, lipid metabolism, and intracellular transport. Overall, chronic exposure to ECA led to adverse cardiovascular and pulmonary effects in mice, although they were less pronounced than those of CS exposure. This study provides evidence that e-cigarettes may be less harmful than combustible cigarettes for the long-term health of the cardiovascular and respiratory systems in mice. However, further human studies are needed to clarify the long-term health risks associated with e-cigarette use.

The application of a self-designed microfluidic lung chip in the assessment of different inhalable aerosols.

Microfluidic-based assessment platforms have recently attracted considerable attention and have been widely used for evaluating in vitro toxic effects. In the present study, we developed an original real-time aerosol exposure system, which focused on a self-designed microfluidic chip, in order to evaluate the toxicological effects following exposure to inhalable aerosols. The three-layer structured microfluidic chip enables real-time aerosol exposure at the gas-liquid interface. The comprehensive detection of toxic effect biomarkers based on this assessment platform encompasses transcriptomics, in situ fluorescence detection, and the identification of extracellular secretagogues. Correspondingly, the effects of selected inhalable aerosols such as cigarette smoke (CS), heated tobacco product smoke (HS), and electronic cigarette smoke (ES) on gene expression profiles, cell viability, intracellular biomarkers (reactive oxygen species and nitric oxide), apoptosis (caspase-3/7 activity), and extracellular biomarkers (IL-8, IL-1ß, TNF-α, and malondialdehyde) in the BEAS-2B cells present on the chip were investigated. Following exposure to aerosols derived from CS, HS, and ES, the transcriptome analysis revealed differential expression in these cells. In addition, the overlapping DEGs from the different treatment groups were found to be primarily associated with stimuli and inflammatory responses. Correspondingly, each of the three categories of selected inhalable aerosols was confirmed to induce significant changes in biomarkers that were associated with toxic effects. These results suggest that the original real-time aerosol exposure system centered around a self-designed chip can be applied to the toxic effect evaluation of inhalable aerosol exposure.

Size-classified aerosol-bound heavy metals and their effects on human health risks in industrial and remote areas in Japan.

Airborne aerosols were collected in six size classes (PM<0.1, PM0.1-0.5, PM0.5-1, PM1-2.5, PM2.5-10 and PM>10) to investigate aerosol health risks in remote and industrial areas in Japan. We focused on heavy metals and their water-dispersed fractions. The average concentration of heavy metals was 18 ± 25-86 ± 48 ngm-3 for PM<0.1, 46 ± 19-154 ± 80 for PM0.5-1 ngm-3, 98 ± 49-422 ± 186 ngm-3 for PM1-2.5, 321 ± 305-1288 ± 727 ngm-3 for PM2.5-10 and 65 ± 52-914 ± 339 ngm-3 or PM>10, and these concentrations were higher in industrial areas. Heavy metals emitted from domestic anthropogenic sources were added to the long-range transport component of the aerosols. The water-dispersed fraction of heavy metals contained 3.3-40.1% of the total heavy metals in each size class. The relative contribution of Zn and other species (As, Cd, Cr, Ni, Pb, Mn, V and Cu) increased in the water-dispersed fraction. Smaller particles contained greater proportions of the water-dispersed heavy metal fraction. Carcinogenic risk (CR) and the hazard index (HI) were estimated for each size class. The CR of carcinogens was at acceptable levels (<1 ×10-6) for five particle size fractions. The HI values for carcinogens and noncarcinogens were also below acceptable levels (<1) for the same five size fractions. The estimated CR and HI values were dominated by contributions from the inhalation process.

Health effects of carbonaceous PM2.5 compounds from residential fuel combustion and road transport in Europe.

Exposure to fine particulate matter (PM2.5) is associated with an increased risk of morbidity and mortality. In Europe, residential fuel combustion and road transport emissions contribute significantly to PM2.5. Toxicological studies indicate that PM2.5 from these sources is relatively more hazardous, owing to its high content of black and organic carbon. Here, we study the contribution of the emissions from these sectors to long-term exposure and excess mortality in Europe. We quantified the impact of anthropogenic carbonaceous aerosols on excess mortality and performed a sensitivity analysis assuming that they are twice as toxic as inorganic particles. We find that total PM2.5 from residential combustion leads to 72,000 (95% confidence interval: 48,000-99,000) excess deaths per year, with about 40% attributed to carbonaceous aerosols. Similarly, road transport leads to about 35,000 (CI 23,000-47,000) excess deaths per year, with 6000 (CI 4000-9000) due to carbonaceous particles. Assuming that carbonaceous aerosols are twice as toxic as other PM2.5 components, they contribute 80% and 37%, respectively, to residential fuel combustion and road transport-related deaths. We uncover robust national variations in the contribution of each sector to excess mortality and emphasize the importance of country-specific emission reduction policies based on national characteristics and sectoral shares.

Toxicological assessment of E-cigarette flavored E-liquids aerosols using Calu-3 cells: A 3D lung model approach.

Scientific progress and ethical considerations are increasingly shifting the toxicological focus from in vivo animal models to in vitro studies utilizing physiologically relevant cell cultures. Consequently, we evaluated and validated a three-dimensional (3D) model of the human lung using Calu-3 cells cultured at an air-liquid interface (ALI) for 28 days. Assessment of seven essential genes of differentiation and transepithelial electrical resistance (TEER) measurements, in conjunction with mucin (MUC5AC) staining, validated the model. We observed a time-dependent increase in TEER, genetic markers of mucus-producing cells (muc5ac, muc5b), basal cells (trp63), ciliated cells (foxj1), and tight junctions (tjp1). A decrease in basal cell marker krt5 levels was observed. Subsequently, we utilized this validated ALI-cultured Calu-3 model to investigate the adversity of the aerosols generated from three flavored electronic cigarette (EC) e-liquids: cinnamon, vanilla tobacco, and hazelnut. These aerosols were compared against traditional cigarette smoke (3R4F) to assess their relative toxicity. The aerosols generated from PG/VG vehicle control, hazelnut and cinnamon e-liquids, but not vanilla tobacco, significantly decreased TEER and increased lactate dehydrogenase (LDH) release compared to the incubator and air-only controls. Compared to 3R4F, there were no significant differences in TEER or LDH with the tested flavored EC aerosols other than vanilla tobacco. This starkly contrasted our expectations, given the common perception of e-liquids as a safer alternative to cigarettes. Our study suggests that these results depend on flavor type. Therefore, we strongly advocate for further research, increased user awareness regarding flavors in ECs, and rigorous regulatory scrutiny to protect public health.

Preliminary study on the E-liquid and aerosol on the neurobehavior of C. elegans.

E-cigarettes, also known as electronic nicotine delivery systems (ENDS), are mainly used among adolescents and young adults. Similar to traditional cigarettes, different concentrations of nicotine are also added to E-cigarette's liquid (E-liquid), but due to the supplementation of chemicals such as propylene glycol (PG), vegetable glycerin (VG) and flavors, it is difficult to determine the risk after using E-cigarettes. And given to the specificity of the aerosol particle composition and atomization process of E-cigarettes, it is necessary to assess the neurotoxic effects of long-term E-cigarettes use. In this study, two commercial nicotine-containing (5%) and nicotine-free E-liquids were diluted to investigate the neurobehavioral changes and addictive tendencies of developing C. elegans after sub-chronic exposure to E-liquid. The results showed that sub-chronic exposure of E-liquid could lead to impaired growth and development of nematodes, abnormal general neuromotor behavior and advanced learning and memory behavior, and nicotine-containing E-liquid could also lead to increased addiction tendency of nematodes. Although the damage effect of nicotine free E-liquid is smaller than that of the nicotine-containing group, its toxic effect cannot be ignored. Further analysis of the neurotoxicity mechanism found that redox imbalance-mediated mitochondrial stress and aging may be important causes of E-liquid-induced biological damage. The biosafety of e-cigarette aerosols was also included in the assessment. The study found that the heated atomization process did not alter the E-liquid components, and E-cigarette aerosols still have the effect of interfering with the growth and development of nematodes and neurobehavior, and its addictive nature is also of concern. This study can provide new ideas for future studies on the neurotoxic effects and safety assessment of the E-cigarettes, and provide theoretical reference for the study on the injury mechanism of E-cigarettes.

Comparison of the toxicological potential of two JUUL ENDS products to reference cigarette 3R4F and filtered air in a 90-day nose-only inhalation toxicity study.

Electronic nicotine delivery systems (ENDS) are generally recognized as less harmful alternatives for those who would otherwise continue to smoke cigarettes. The potential toxicity of aerosols generated from JUUL Device and Virginia Tobacco (VT3) or Menthol (ME3) JUULpods at 3.0% nicotine concentration was assessed in rats exposed at target aerosol concentrations of 1400 µg/L for up to 6 h/day on a 5 day/week basis for at least 90 days (general accordance with OECD 413). 3R4F reference cigarette smoke (250 µg/L) and Filtered Air were used as comparators. JUUL ENDS product aerosol exposures at >5x the 3R4F cigarette smoke level resulted in greater plasma nicotine and cotinine levels (up to 2x). Notable cigarette smoke related effects included pronounced body weight reductions in male rats, pulmonary inflammation evidenced by elevated lactate dehydrogenase, pro-inflammatory cytokines and neutrophils in bronchoalveolar lavage fluid, increased heart and lung weights, and minimal to marked respiratory tract histopathology. In contrast, ENDS aerosol exposed animals had minimal body weight changes, no measurable inflammatory changes and minimal to mild laryngeal squamous metaplasia. Despite the higher exposure levels, VT3 and ME3 did not result in significant toxicity or appreciable respiratory histopathology relative to 3R4F cigarette smoke following 90 days administration.

Preliminary assessment of toxicity of aerosol samples from central-west Brazil using Artemia spp. bioassays.

The present study reports the development of a bioassay using Artemia spp. to analyse the preliminary ecotoxicity of atmospheric aerosols (PM), which can affect the environment and human health. Herein, PM samples were collected in the city of Goiânia (Brazil) in 2016, extracted with ultrapure water and subsequently filtered through membranes with different pore sizes (100, 0.8, and 0.22 µm), and the extracts employed in the bioassays. The mortality rates (endpoint analysed) declined to membranes with smaller pore sizes (15 ± 4%, 47 ± 10% and 43 ± 9% for pore sizes of 100 µm, 0.8 µm and 0.22 µm, respectively). In general, the toxicity of the extract depended on its concentration, except for the sample with a higher negative particle surface charge, which presents a lower affinity for the negatively charged surfaces of cellular membranes. Moreover, although the PM concentration was higher for the sample collected during the dry season (September), the mortality rate was not significantly different to that determined for a sample with similar physical and chemical characteristics collected in the rainy season (December). This result demonstrates the importance of monitoring PM toxicities and their chemical and physical characteristics, in addition to their concentrations. Therefore, the new protocol to provide a preliminary analysis of the toxicity of the extracts of aerosol emerges as a useful, accessible, and fast tool for monitoring possible environmental hazards, and can simplify fieldwork.

An in vitro evaluation of e-vapor products: The contributions of chemical adulteration, concentration, and device power.

Homemade e-liquids and power-adjustable vaping devices may carry higher risks than commercial formulations and fixed-power devices. This study used human macrophage-like and bronchial epithelial (NHBE) cell cultures to investigate toxicity of homemade e-liquids containing propylene glycol and vegetable glycerin (PG/VG), nicotine, vitamin E acetate (VEA), medium-chain fatty acids (MCFAs), phytol, and cannabidiol (CBD). SmallAir™ organotypic epithelial cultures were exposed to aerosols generated at different power settings (10-50 W). Carbonyl levels were measured, and endpoints reflecting epithelial function (ciliary beating frequency [CBF]), integrity (transepithelial electrical resistance [TEER]), and structure (histology) were investigated. Treatment with nicotine or VEA alone or with PG/VG did not impact cell viability. CBD, phytol, and lauric acid caused cytotoxicity in both culture systems and increased lipid-laden macrophages. Exposure of SmallAir™ organotypic cultures to CBD-containing aerosols resulted in tissue injury and loss of CBF and TEER, while PG/VG alone or with nicotine or VEA did not. Aerosols generated with higher power settings had higher carbonyl concentrations. In conclusion, the presence and concentration of certain chemicals and device power may induce cytotoxicity in vitro. These results raise concerns that power-adjustable devices may generate toxic compounds and suggest that toxicity assessments should be conducted for both e-liquid formulations and their aerosols.

Biological impact of sequential exposures to allergens and ultrafine particle-rich combustion aerosol on human bronchial epithelial BEAS-2B cells at the air liquid interface.

The prevalence of allergic diseases is constantly increasing since few decades. Anthropogenic ultrafine particles (UFPs) and allergenic aerosols is highly involved in this increase; however, the underlying cellular mechanisms are not yet understood. Studies observing these effects focused mainly on singular in vivo or in vitro exposures of single particle sources, while there is only limited evidence on their subsequent or combined effects. Our study aimed at evaluating the effect of subsequent exposures to allergy-related anthropogenic and biogenic aerosols on cellular mechanism exposed at air-liquid interface (ALI) conditions. Bronchial epithelial BEAS-2B cells were exposed to UFP-rich combustion aerosols for 2 h with or without allergen pre-exposure to birch pollen extract (BPE) or house dust mite extract (HDME). The physicochemical properties of the generated particles were characterized by state-of-the-art analytical instrumentation. We evaluated the cellular response in terms of cytotoxicity, oxidative stress, genotoxicity, and in-depth gene expression profiling. We observed that single exposures with UFP, BPE, and HDME cause genotoxicity. Exposure to UFP induced pro-inflammatory canonical pathways, shifting to a more xenobiotic-related response with longer preincubation time. With additional allergen exposure, the modulation of pro-inflammatory and xenobiotic signaling was more pronounced and appeared faster. Moreover, aryl hydrocarbon receptor (AhR) signaling activation showed to be an important feature of UFP toxicity, which was especially pronounced upon pre-exposure. In summary, we were able to demonstrate the importance of subsequent exposure studies to understand realistic exposure situations and to identify possible adjuvant allergic effects and the underlying molecular mechanisms.

Key Challenges and Recommendations for In Vitro Testing of Tobacco Products for Regulatory Applications: Consideration of Test Materials and Exposure Parameters.

The Institute for In Vitro Sciences (IIVS) is sponsoring a series of workshops to identify, discuss and develop recommendations for optimal scientific and technical approaches for conducting in vitro assays, to assess potential toxicity within and across tobacco and various next generation nicotine and tobacco products (NGPs), including heated tobacco products (HTPs) and electronic nicotine delivery systems (ENDS). The third workshop (24-26 February 2020) summarised the key challenges and made recommendations concerning appropriate methods of test article generation and cell exposure from combustible cigarettes, HTPs and ENDS. Expert speakers provided their research, perspectives and recommendations for the three basic types of tobacco-related test articles: i) pad-collected material (PCM); ii) gas vapour phase (GVP); and iii) whole smoke/aerosol. These three types of samples can be tested individually, or the PCM and GVP can be combined. Whole smoke/aerosol can be bubbled through media or applied directly to cells at the air-liquid interface. Summaries of the speaker presentations and the recommendations developed by the workgroup are presented. Following discussion, the workshop concluded the following: that there needs to be greater standardisation in aerosol generation and collection processes; that methods for testing the NGPs need to be developed and/or optimised, since simply mirroring cigarette smoke testing approaches may be insufficient; that understanding and quantitating the applied dose is fundamental to the interpretation of data and conclusions from each study; and that whole smoke/aerosol approaches must be contextualised with regard to key information, including appropriate experimental controls, environmental conditioning, analytical monitoring, verification and performance criteria.

Chemical Profiles and Toxicity of Electronic Cigarettes: An Umbrella Review and Methodological Considerations.

BACKGROUND: Electronic cigarettes (ECs) are often marketed as a safer alternative to combustible tobacco products. The global EC market has rapidly expanded since their introduction, creating an urgent need for research describing the toxicity and chemical composition of ECs. We conducted an umbrella review to summarize the evidence from existing systematic reviews (SRs). METHODS: The search for SRs was conducted across four electronic databases through 25 January 2022. Methodological quality was assessed using the AMSTAR-2 quality appraisal tool. RESULTS: Twenty-five SRs were included in our umbrella review. Chemical profiles widely varied across studies included in the reviews, which was mainly attributed to the lack of standardized protocols investigating the constituents, and differences in EC devices and e-liquids tested. Metals were more abundant in some EC aerosols than cigarettes, while carbonyls were typically found at lower levels. There was consistent evidence of in vitro toxicity from EC aerosol and e-liquid exposure. AMSTAR-2 revealed important limitations across reviews. CONCLUSIONS: While most reviews concluded that ECs were likely less harmful than cigarettes, there was hesitancy to draw clear conclusions due to variable analytical procedures and inconsistent findings among the included studies. Future SRs with improved methodology and reporting are needed to adequately inform tobacco regulatory actions.

In vitro cytoxicity profile of e-cigarette liquid samples on primary human bronchial epithelial cells.

Cigarette smoke is associated to severe chronic diseases. The most harmful components of cigarette smoke derive from the combustion process, which are significantly reduced in the electronic cigarette aerosol, thus providing a valid option in harm reduction strategies. To develop safer products, it is therefore necessary to screen electronic cigarette liquids (e-liquids) to meet high safety standards defined by government regulations. The aim of the present study was to evaluate the presence of metal- and plastic-derived contaminants in four different commercial e-liquids with high concentration of nicotine and their cytotoxic effect in normal human bronchial epithelial cells by a number of in vitro assays, in comparison with the 1R6F reference cigarette, using an air-liquid interface (ALI) exposure system. Moreover, we evaluated the effect of aerosol exposure on oxidative stress by measuring the production of reactive oxygen species and mitochondrial potential. Our results showed no contaminants in all e-liquids and a significantly reduced cytotoxic effect of e-liquid aerosol compared to cigarette smoke as well as a maintained mitochondria integrity. Moreover, no production of reactive oxygen species was detected with e-cigarette aerosol. In conclusion, these results support the reduced toxicity potential of e-cigs compared to tobacco cigarettes in an in vitro model resembling real life smoke exposure.

Chemical analysis of selected harmful and potentially harmful constituents and in vitro toxicological evaluation of leading flavoured e-cigarette aerosols in the Chinese market.

Use of electronic cigarettes (e-cigarettes) has increased significantly over the past decade due to consumer perception that these products represent a less risky alternative to combustible cigarettes. E-liquids generally contain a simple mix of vegetable glycerin, propylene glycerol, nicotine, organic acids, and flavourings. Regulators require that harmful and potentially harmful constituents (HPHCs) that might cause harm to the consumer must be monitored in the aerosol generated by e-cigarettes and in cigarette smoke (CS). To quantify HPHCs in aerosols from commercial flavoured e-cigarettes in Chinese market, this study has systematically compared levels of HPHCs, including eight carbonyls, five volatile organic compounds, four tobacco-specific nitrosamines, 16 polycyclic aromatic hydrocarbons, and seven heavy metals, in the aerosols of four market-leading flavoured e-cigarettes and mainstream CS, alongside in vitro cytotoxicity and mutagenicity assays. The vast majority of HPHCs were either undetected or significantly lower in the e-cigarette aerosols than in commercial CS or reference CS (3R4F). Where HPHCs were detected, there were small variations among the different flavoured e-cigarettes. In the neutral red uptake and Ames assays, aqueous extracts of the e-cigarette aerosols did not induce obvious cytotoxicity or mutagenicity, whereas CS aqueous extract showed dose-related cytotoxicity and mutagenicity. Collectively, these results indicate that use of e-cigarettes might potentially lead to a significant reduction in exposure to harmful substances, with fewer cytotoxic and mutagenic effects, as compared with conventional smoking. Further studies based on human puffing conditions and longer evaluation periods will be needed to substantiate this potential.

Considerations on dosimetry for in vitro assessment of e-cigarette toxicity.

Electronic cigarettes (or e-cigarettes) can be used as smoking cessation aid. Some studies tend to show that they are less hazardous than tobacco cigarettes, even if it does not mean they are completely safe. The huge variation in study designs assessing in vitro toxicity of e-cigarettes aerosol makes it difficult to make comparisons and draw robust and irrefutable conclusions. In this paper, we review this heterogeneity (in terms of e-cigarette products, biological models, and exposure conditions) with a special focus on the wide disparity in the doses used as well as in the way they are expressed. Finally, we discuss the major issue of dosimetry and show how dosimetry tools enable to align data between different exposure systems or data from different laboratories and therefore allow comparisons to help further exploring the risk potential of e-cigarettes.

Subacute Pulmonary Toxicity of Glutaraldehyde Aerosols in a Human In Vitro Airway Tissue Model.

Glutaraldehyde (GA) has been cleared by the Center for Devices and Radiological Health (CDRH) of the Food and Drug Administration (FDA) as a high-level disinfectant for disinfecting heat-sensitive medical equipment in hospitals and healthcare facilities. Inhalation exposure to GA is known to cause respiratory irritation and sensitization in animals and humans. To reproduce some of the known in vivo effects elicited by GA, we used a liquid aerosol exposure system and evaluated the tissue responses in a human in vitro airway epithelial tissue model. The cultures were treated at the air interface with various concentrations of GA aerosols on five consecutive days and changes in tissue function and structure were evaluated at select timepoints during the treatment phase and after a 7-day recovery period. Exposure to GA aerosols caused oxidative stress, inhibition of ciliary beating frequency, aberrant mucin production, and disturbance of cytokine and matrix metalloproteinase secretion, as well as morphological transformation. Some effects, such as those on goblet cells and ciliated cells, persisted following the 7-day recovery period. Of note, the functional and structural disturbances observed in GA-treated cultures resemble those found in ortho-phthaldehyde (OPA)-treated cultures. Furthermore, our in vitro findings on GA toxicity partially and qualitatively mimicked those reported in the animal and human survey studies. Taken together, observations from this study demonstrate that the human air-liquid-interface (ALI) airway tissue model, integrated with an in vitro exposure system that simulates human inhalation exposure, could be used for in vitro-based human hazard identification and the risk characterization of aerosolized chemicals.

Microcystin-LR aerosol induces inflammatory responses in healthy human primary airway epithelium.

Harmful algal blooms plague bodies of freshwater globally. These blooms are often composed of outgrowths of cyanobacteria capable of producing the heptapeptide Microcystin-LR (MC-LR) which is a well-known hepatotoxin. Recently, MC-LR has been detected in aerosols generated from lake water. However, the risk for human health effects due to MC-LR inhalation exposure have not been extensively investigated. In this study, we exposed a fully differentiated 3D human airway epithelium derived from 14 healthy donors to MC-LR-containing aerosol once a day for 3 days. Concentrations of MC-LR ranged from 100 pM to 1 µM. Although there were little to no detrimental alterations in measures of the airway epithelial function (i.e. cell survival, tissue integrity, mucociliary clearance, or cilia beating frequency), a distinct shift in the transcriptional activity was found. Genes related to inflammation were found to be upregulated such as C-C motif chemokine 5 (CCL5; log2FC = 0.57, p = 0.03) and C-C chemokine receptor type 7 (CCR7; log2FC = 0.84, p = 0.03). Functionally, conditioned media from MC-LR exposed airway epithelium was also found to have significant chemo-attractive properties for primary human neutrophils. Additionally, increases were found in the concentration of secreted chemokine proteins in the conditioned media such as CCL1 (log2FC = 5.07, p = 0.0001) and CCL5 (log2FC = 1.02, p = 0.046). These results suggest that MC-LR exposure to the human airway epithelium is capable of inducing an inflammatory response that may potentiate acute or chronic disease.

Application of a new approach method (NAM) for inhalation risk assessment.

The US Environmental Protection Agency (USEPA) and other regulatory authorities have been working to utilize in vitro studies with human cells and in silico modelling to reduce the use of vertebrate animals for evaluating chemical risk. Using the Source-to-Outcome framework, a novel mathematical procedure was developed to estimate the human equivalent concentration (HEC) for inhalation risk assessment based upon the relevant aerosol characterization, respiratory dosimetry modelling, and endpoints derived from an in vitro assay using human respiratory epithelial tissue. The procedure used the retained doses at the various areas of the inhalation tract estimated from a computational fluid-particle dynamics (CFPD) model coupled with a simple clearance model. The effect of exposure was derived from an in vitro assay. The magnitude of exposure and the particle size distributions (PSDs) of the external aerosol droplets were obtained from Unit Exposure values published by the USEPA and published monitoring studies, respectively. The Source-to-Outcome approach incorporates external and internal exposure metrics with the toxicity pathway. The information was then integrated to conduct a risk assessment for agricultural operators exposed to products containing chlorothalonil (CTN), a broad-spectrum fungicide. The HECs for three different PSDs considered in this work ranged from 0.043 to 0.112 mg-CTN/L for nasal and oral breathing. These were compared with the estimated average daily exposure concentration for six representative application scenarios. The resulting margins of exposure (MOEs) ranged from 230 to 70,000 depending on the application scenario. This New Assessment Method (NAM) that combined human in silico and human in vitro methods, eliminated the typical uncertainties associated with extrapolation from rodent studies, with their associated interspecies toxicokinetics and toxicodynamics differences. The intraspecies toxicodynamics and toxicokinetics, are still relevant and may need to be used in an inhalation risk assessment. The NAM presented in this work is not chemical-specific and may be applied to conduct an inhalation risk assessment for workers as well as bystanders who could be exposed to aerosol particles of any cytotoxic respiratory irritant.

Assessment of inhalation toxicity of cigarette smoke and aerosols from flavor mixtures: 5-week study in A/J mice.

Most flavors used in e-liquids are generally recognized as safe for oral consumption, but their potential effects when inhaled are not well characterized. In vivo inhalation studies of flavor ingredients in e-liquids are scarce. A structure-based grouping approach was used to select 38 flavor group representatives (FGR) on the basis of known and in silico-predicted toxicological data. These FGRs were combined to create prototype e-liquid formulations and tested against cigarette smoke (CS) in a 5-week inhalation study. Female A/J mice were whole-body exposed for 6 h/day, 5 days/week, for 5 weeks to air, mainstream CS, or aerosols from (1) test formulations containing propylene glycol (PG), vegetable glycerol (VG), nicotine (N; 2% w/w), and flavor (F) mixtures at low (4.6% w/w), medium (9.3% w/w), or high (18.6% w/w) concentration or (2) base formulation (PG/VG/N). Male A/J mice were exposed to air, PG/VG/N, or PG/VG/N/F-high under the same exposure regimen. There were no significant mortality or in-life clinical findings in the treatment groups, with only transient weight loss during the early exposure adaptation period. While exposure to flavor aerosols did not cause notable lung inflammation, it caused only minimal adaptive changes in the larynx and nasal epithelia. In contrast, exposure to CS resulted in lung inflammation and moderate-to-severe changes in the epithelia of the nose, larynx, and trachea. In summary, the study evaluates an approach for assessing the inhalation toxicity potential of flavor mixtures, thereby informing the selection of flavor exposure concentrations (up to 18.6%) for a future chronic inhalation study.

Evaluation of inhalation toxicology after a 90-day xylitol aerosol exposure in Sprague-Dawley rats.

Xylitol is a hygroscopic compound known to protect nasal cavity against bacteria. It has also been developed into nasal spray and evaluated as a potential candidate drug for respiratory diseases. Consequently, it is necessary to study its inhalation toxicity. Based on our previous study on its subacute inhalation toxicity, this study aimed to investigate the safety of xylitol inhalation for long-term use. According to the OECD Test Guideline 413, Sprague-Dawley rats were randomly divided into six groups and exposed with different concentrations of xylitol aerosol or air. After exposure for 90-day, the recovery groups were continued to observe for a recovery period of 28-day. No significant changes in body weight were observed between sham and xylitol groups. Several significant differences in hematological, clinical chemistry, bronchoalveolar lavage fluid were observed, which either had no dose-effect relationship for both male and female rats or were restored during the recovery period. Finally, except for high dose group of xylitol, two rats showed a small amount of inflammatory exudate in alveolar and bronchial cavities, which was restored in the recovery period. The rest of rats showed no obvious difference. For the recovery groups, no significant difference was observed between these two groups. In conclusion, the no observable adverse effect level (NOAEL) of xylitol in our subchronic inhalation toxicological experiments was 2.9 mg/L, which indicated that xylitol for rats' long-time inhalation is tolerant and safe.